WS2812B Addressable RGB LEDs | Control using Arduino

Table of Contents

In this project, we will take a look at an interesting product called the WS2812B Addressable LEDs. They are individually addressable RGB LEDs and are also called by different names like NeoPixel by Adafruit, for example. In this tutorial, we will learn about the WS2812B LEDs, its internal structure and construction and also how to control individually addressable LEDs using Arduino.


If you have made some sort of LED related project, then you probably might have used discrete LEDs (either through hole or SMD). These LEDs may be single color LEDs or RGB LEDs.

The main drawback of discrete LEDs is that if you use them in an array, you lose the privilege to control them individually. For example, if you connect three or four LEDs to a single pin of Arduino using a transistor, then all the LEDs in the array will have a same behavior i.e. brightness control or color change.

Another scenario is that you might have also used LED Strip Lights for Christmas decoration or regular home lighting. You might have observed that even in expensive LED Strip Lights, you do not have the feature to control individual LEDs.

If your aim is to control individual LEDs in a strip, then WS2812B Addressable RGB LEDs are the answer for you.

WS2812B Addressable LEDs

The WS2812B Addressable LED Strip is an intelligent light source that contains a control IC and an RGB LED in a same package, usually in SMD 5050 form factor. The following image shows a strip of WS2812B LEDs.

WS2812B Addressable LEDs Featured Image

At first glance, it looks like a regular LED strip. But upon a closer inspection, you can find the WS2812B LED Control IC integrated into the SMD 5050 RGB LED Package. The following blown up image shows the same.

WS2812B Addressable LEDs Circuit Diagram

Individual WS2812B LED Block has four pins namely VDD, VSS (GND), DIN and DOUT. The functions of these pins are very simple and the following table gives a simple function description of the pins.

Pin Function
VDD Power Supply for LED
VSS Ground
DIN Control Data Signal Input
DOUT Control Data Signal Output

The power supply for the WS2812B IC is also supplied through the VDD Pin.

WS2812B LED Application Circuit

To understand how the WS2812B LEDs can be individually controlled, the following application circuit will be useful. All the WS2812B LEDs are connected in a cascade manner where the DO of the first LED is connected to the DIN of the second LED and so on.

But the first LED has to receive data through its DIN pin from a Microcontroller like Arduino. The following image shows the typical application circuit block diagram.

WS2812B Addressable LEDs Application

The data transfer protocol used by the WS2812B LEDs is NRZ Mode. The first DIN Port of the WS2812B LED array receives data from the microcontroller. The data for individual pixel is of 24-bit that consists of individual Red, Green and Blue LED control data of 8-bits each. The order of data must be GRB and the composition of the 24-bit data is shown below. Note that HIGH bit data is sent first.

WS2812B Addressable LEDs 24-bit Data

Once the first WS2812B Block receives the first 24-bit data, the data is sent to its internal latch for further decoding. The remaining data is reshaped by its signal reshaping and amplification circuit and is passed to the next pixel in the cascade through the DO pin.

How to Control WS2812B LED using Arduino?

Now, let us proceed to control the WS2812B LED Array using Arduino. Before going further into designing the schematic, there is one important thing we need to address i.e. the power supply to the project.

Each Individual WS2812B LED Pixel has three LEDs and a control IC. So, the current requirement of one pixel is around 60 mA. If you have a strip that contains 20 WS2812B Individually Addressable LEDs, then the total current requirement is 20 * 60 mA = 1.2 A.

This is more than Arduino can supply, either through the USB port (which can supply a maximum of 300 mA) or through 5V barrel jack (which can supply a maximum of 900 mA).

So, the best way to power up the project i.e. both Arduino and the WS2812B LED Strip is with the help of an external 5v supply that can provide enough current.

Now that the power supply part of the project is clear, we can now proceed with the schematic of the project.

Circuit Diagram

The following image shows connection between Arduino UNO and the WS2812B RGB LED Strip. The 5V of Arduino UNO and the LEDs are connected to an external power supply along with the GND (VSS).

The DIN pin of the LED Strip is connected to Digital IO pin 7 of the Arduino through a 330Ω Resistor.

WS2812B Addressable LEDs Circuit Diagram

Components Required

  • Arduino UNO
  • WS2812B LEDs
  • 5V Power Supply (minimum 2A)
  • 330Ω Resistor

Programming Arduino

The first step for programming Arduino is to download a supporting library called “FastLED”. You can download the library from the following link: “FastLED Library”.

Extract the contents of the zip file and rename the folder as “FastLED”. Move this folder to the libraries folder of the Arduino.


#include <FastLED.h>

#define LEDPIN     7
#define NUMOFLEDS    10


void setup() {

  FastLED.addLeds<WS2812, LEDPIN, GRB>(leds, NUMOFLEDS);


void loop() {

  for (int i = 0; i <= 9; i++) {
    leds[i] = CRGB ( 0, 0, 255);;
  for (int i = 9; i >= 0; i--) {
    leds[i] = CRGB ( 255, 0, 0);;


A simple introduction to WS2812B Individually Addressable LEDs is given in this tutorial along a project to show how we can control WS2812B LEDs with Arduino. If you understand these basics, then you can implement a wide range of projects.


Similar Articles & Blogs

Explore similar articles on various electronics and electrical topics – 

Logic NOT Function

The Logic NOT Function is simply a single input inverter that changes the input of a logic level “1” to an output of logic level “0” and

Learn More >>

Logic OR Function

The Logic OR Function function states that an output action will become TRUE if either one “OR” more events are TRUE, but the order at which they

Learn More >>

Logic AND Function

In 1854, George Boole performed an investigation into the “laws of thought” which were based around a simplified version of the “group” or “set” theory, and from

Learn More >>

Binary Coded Decimal

As we have seen in this Binary Numbers section of tutorials, there are many different binary codes used in digital and electronic circuits, each with

Learn More >>